DEFAULT CARD IMAGE STATION GEODETICS FILE (UNIT 16)

UNIT 16 in GEODYN IIS is used as input unit for Stations position setup. Station position information included on UNIT 16 will be used unless other information referring to the same stations is included on UNIT 05. Cards to be included as input to UNIT 16 are the following:

• STAPOS which introduces the station position subgroup
• GEODETIC which defines station geodetic information
• EXTRAGEO which specifies planetary shape parameters
• ELCUTOFF which sets station elevation cutoff angle
• INSTRMNT which sets station antenna and provides operating frequency information
• STATION COORDINATE which gives the station positions
• STATION VELOCITY GROUP CARDS (STAVEL,TIMVEL only)
• STATION EARTH TIDES COEFFICIENT CARDS (STATH2 and STATL2)
• ENDSTA which denotes the end of the station position subgroup

The structure of this file is such that the first card should be a STAPOS card and the last card is a ENDSTA card. STATION COORDINATE cards, STATION VELOCITY cards and STATION EARTH TIDES COEFFICIENT cards follow the appropriate cards of other types necessary to specify the conditions that are to apply to those station locations.

Cards which contain ajustment information (ADJUSTED, CORREL, CONSTADJ, CONSTEND) are not to be included on UNIT 16.

For detailed description see the GLOBAL SET STAPOS subgroup. Input cards included on UNIT 05 will override input cards on UNIT 16.

DEC 1992

9212.0