----+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8
OBSVU 3 0010
----+----0----+----0----+----0----+----0----+----0----+----0----+----0----+----0
COLUMNS FORMAT DESCRIPTION DEFAULT VALUE & UNITS
1-5 A5 OBSVU - Controls residual printout
for all arcs.
7 I1 Residual printout controlled as 0
follows:
=0 or blank - Indicates that
residuals are requested on the
first inner iteration of the first
global iteration and the last inner
iteration of the last global
iteration for all arcs. This is the
same as =3 below.
=1 Indicates that residuals are
requested on the first inner
iteration of the first global
interaction for all arcs.
=2 Indicates that residuals are
requested on the last inner
iteration of the last global
iteration for all arcs.
=3 Indicates that residuals are
requested on the first inner
iteration of the first global
iteration and the last inner
iteration of the last global
iteration for all arcs.
=4 Indicates residuals are
requested on all iterations for
all arcs.
=5 Indicates no residuals are
requested for any arc.
SEPT 1990
9007.0
GLOBAL SET
OBSVU (cont)
COLUMNS FORMAT DESCRIPTION DEFAULT VALUE & UNITS
8 I1 = 1 Indicates preprocessing 0
corrections are to be written on
unit 16 for the iterations indicated
by column 7 and for the modulo
selected in columns 21-24.
Residuals must be printed on the first
iteration if the option is invoked.
[see NOTE 1 below]
21-24 I4 Modulo number for printing of 1
residuals, preprocessing corrections,
and partials. Default is to print all
residuals. A value N input here requests
printing of every Nth residual.
NOTE[1]: The numbering system that is used on the preprocessing
printout on UNIT16 is related to the Header Record and
partition number as described in Volume 5 Section 2 under
Observation Corrections Record.
[eg. if the UNIT16 printout was for a range measurement
and the number printed was 13 it would mean Header #1
partition #3 which would pertain to a dry tropospheric
refraction correction for station #1. G means that the
program computes and applies the correction. Absence of
a "G" means the correction was provided by the data record.]
IF CARD OMITTED: Residuals are requested on the first inner iteration of
the first global iteration and the last inner iteration
of the last global iteration for all arcs. No preprocessing
nor measurement partial files are created and all residuals
in the given iteration are output.
JUL 1998
9808.0
GLOBAL SET